9 PCS PETG Tubing Cut and Bending Tool kit OD 14MM ID 10MM (9 PCS)

Great set for doing your custom loops. My first rigid tubing build and every thing worked exactly as it should have.Many reviewers complain about the saw being flimsy. I got the same saw and had no issues with it what so ever. The blade is sharp and when used did not flex or come out of the frame. Getting a straight cut is some what of a challenge but taking your time is the key.The dies for making the bends fit my 10/14 tubing perfectly as did the white silicone tubing insert. A glass of water and a few drops of dish soap goes a long way in getting the tubing in and out easily. The chamfer tool could use a bit of work but it does what its supposed to do and does it fairly well. The rasp has a bit of a cheesy feel to it and is quite wide which helps for removing the burrs you get from the saw before using the chamfer tool.Im not real sure what every one is complaining about. Im glad I spent the 30 bucks for the kit.What would I change?Id separate this set up for hard tube OR soft tube. which would make it more marketable as I was not running soft tube so the white cutters were useless for me.My Build:Mobo- GIGABYTE AORUS GA-AX370-Gaming K5 (AMD Ryzen AM4/ X370/ RGB FUSION/ SMART FAN 5/ HDMI/ M.2/ USB 3.1 Type-C/ ATX/ DDR4/ Motherboard)CPU- AMD Ryzen 7 1800X Processor (YD180XBCAEWOF)Memory- G.SKILL TridentZ RGB Series 16GB (2 x 8GB) (PC4 25600) F4-3200C16D-16GTZRGPU- ASUS STRIX Radeon R9 390 Overclocked 8 GB DDR5 512-bit DisplayPort HDMI 1.4a DVI-I Gaming Graphics CardFittings- XSPC 10/14Cooling block- XSPC RayStorm RGB WaterBlock V3, AMD CPU (AM4 Compatible)Radiator- XSPC EX360 High Performance Radiator (Supports 3 x 120mm Fans)Tubing- XSPC PETG Tubing 10mm ID, 14mm OD, 0.5m , Clear, 8-packCoolant- XSPC EC6 High Performance Premix Coolant, 1000 mL, Green UVPump- Enermax NEOChanger 300ml RGB LED Reservoir and Pump Kits with Remote Control, Synchronisable RGB lighting via Motherboard, ELC-NC150RGB

Most seem to give this kit mixed reviews while I thought it was pretty good overall. Did my first custom PC water loop and did it all with this kit. Only reason I deduct a star is it comes with cheap plastic zip bag when a cloth bag would have been better and not cost manufacturer much more. Also, while all the tools did what they should, some did feel a tad cheap, but it was cheap so tough to be too hard on that.The PETG angled bend pieces (not sure proper name) helped me get near perfect bends. They do seem to be made for smaller or larger tubing (10/12 or 12/16), and I used smaller which made it feel loose, but didn't prevent me getting good bends.The saw seems the flimsiest, but still cut through PETG very well. Silocon insert fit well, but can't tell how it would do on larger tubing. The clamp/cutters worked well too, but again felt cheap.I would recommend this for someone needing PETG tube handling kit and not looking to spend a lot.

Great quality product! Really a joy to use as a first timer, I preferred hand vends admittedly but the angle guides were helpful a few times and made the process a lot smoother. The cutting wheel is very precise and cuts cleanly with the chamfering tool taking care of the dirty work. Would definitely this product, especially for beginners.

Incredible product for the price. No need to spend any more when you're already spending all your money on your liquid cooling components.

Aside from the inside diameter of the tubing I used (both XSPC's and cheap eBay 14mm OD x 10mm ID) measure closer to 10.4mm ID and made the "10mm OD" silicone insert (which measures a little under 10mm OD) didn't work out so well. However, from what I've heard the 10mm insert works fine on other companies PETG/Acrylic tubing.The rest of the tools work great. I haven't had to use the saw. The only thing I might do to change this setup is add a metal shaving tool in case one or two millimeters have to come off a tube, it's pretty painful having to find sandpaper and grind away.

Only left a star since I happen to have a spare saw

I used these for PMMA, didn't need the saw but used it, the rasp worked well, and the silicone tube liners worked well too. I didn't even use the jigs, but they look like they should do fine.

This is a solid bending kit at a great price. Dont listen to the idiots who tried to cut hard PETG tubing with the white cutting tool. Its not made for that. Just use the saw like any other person and your golden. The chamfer toll was very handy and the tube inserts come out very easily even with multiple bends.