EUREKA ERGONOMICAdjustable Keyboard Tray Under Desk, 28x11 Inch Large Slide Out Keyboard & Mouse Platform Tray, Wooden Pull Out Computer Keyboard Drawer for Typing Home Office Desk, Black

I had previously bought a VIVO Large Keyboard tray. The nice thing about it is that it clamps onto the desk/table. That's basically only the nice thing about it. It was very limited in how much space there was for items on the tray. The table I have has a thick edge, so that left very little space for items to be put on the tray. While it fit a keyboard, it wouldn't even fit a regular-sized mouse. I then became interested in this one, and while I didn't want to get one where I had to attach it to the underside of the desk/table, I bit the bullet.I had only measured the width of the keyboard tray to make sure it would fit underneath my table, but my table was slightly oddly shaped as well as having a thick edge. I had not actually taken a look on the underside of the table to see where I would mount the tray, so after starting to mount it, I realized the flat area was just slightly too narrow for the tray. However, fortunately, the L-shaped mount could be facing in instead of facing out... So even with some limitation to the width, I was able to install it successfully. Then, I realized the tray did not pull out as much as I would like due to the thick edge of the table. But again, I found due to the flexibility of installation, the mounts could not be moved closer to the edge, but the tray could be installed to be closer to the edge. So now, I can pull out the tray to the full extent. And then back to the original reason I wanted to replace the VIVO keyboard tray, this tray is adjustable how much room you want to allow for items on the tray, so I set the tray to the lowest position. It may actually be too low now (so I may adjust it to one position higher)... But it's nice to know I have all this flexibility!The photo is showing the limited flat space I have underneath the surface to install the tray. You can see how on the left side, I'm reversing the mount so that the L-shaped mount is facing inside instead of facing outside like on the right side of the tray. Also, you'll see that the left leg of the table is actually blocking where the back mount would be installed, but with this keyboard tray, there's complete flexibility where to install the mounts, so actually on the left side, I installed the two mounts right next to each other instead of one in the front and one in the back. Still extremely stable! Great job in its design!

I like this keyboard tray. It was easy to install with just the right amount of friction for the slides. The only thing I don't like is that it can only be adjusted down to give you more space for a larger keyboard, but not up because of the way the supports are designed.

Packaging was VERY good, both the Amazon outer packaging and the one from the factory; all parts arrived without any damage. Instructions were good (one step was a little unclear); installation was pretty simple. Keyboard drawer works very well; drawer slides easily, and is very solid. It appears that this drawer will give years of service. I love how wide the drawer is, giving the keyboard and mouse plenty of room. Highly recommend!

It's exactly what I wanted. I'm able to use the keyboard and mouse comfortably without pulling it out, allowing me to stay close to my desk top. It also looks way better than the clamp ones, and I didn't even need a drill. I have a mittzon IKEA table made of fiberboard and was surprised it worked just fine.The kit is so well organized and labelled, I felt IKEA couldn't even beat it.One thing though is to ensure a good install I did need to remove my table top, flip it over and screw in the tray. But it honestly was pretty straight forward. I didn't need another person to help.I didn't have any issues with it touching my knees since I have a height adjustable table. The height was so perfect that I could push my chair with arms all the way in. I just wish I bought this one over a clamp one sooner.

Perfect! So happy with my keyboard tray! Great quality, easy instructions and even included a full size screw driver. This was the only tray I found that clears the brace under edge of my table/desk. In my pics tray is extended fully but I could have place front set of brackets on the outside of the table support if I needed the tray to extend out further from under the table. So relieved to find one that works.

I have the "ODK 48 Inch Small L Shaped Gaming Computer Desk" (bought here on Amazon), it has a weird bar like an inch off the edge that goes the entire width of the desk. I wasn't able to buy a clamp keyboard holder because of the bar, so I thought I'd try the screw in ones. I love the way they have everything laid out for you in the box, that's nice. The product seemed pretty sturdy overall, as it was pretty heavy. That being said, they've obviously relabeled some stuff and didn't update that in the instructions which was confusing P1 and P2 were actually L1 and R2 in the box and some other things they had changed that they didn't update in the instructions. This was a pain to put together by myself - and once I finally got it together and put my keyboard on it... it didn't pull out far enough. So I couldn't use it. They keyboard didn't come out far enough even when it was all the way on the edge. Also, my keyboard is a standard keyboard and this thing barely had room for the keyboard and the wrist rest. Without the wrist rest it wouldn't be comfortable at all on your hands. Overall, I can't say I'd recommend it because it doesn't pull out far enough - I know my desk has that weird bar but only half my keyboard came out and it was only about an inch behind the desk (I put it right behind that bar) and half a keyboard coming out still doesn't seem like it would be far enough out for a keyboard and a wrist rest. So, I drilled holes in my desk for nothing! Also, if you already have your desk completely setup, getting this thing on there without taking everything off your desk and flipping it over is extremely hard!

I bought this tray because there are very few trays that are this long. It’s pretty solid and works ok. One of the slides sticks a little more than the other so I docked a star. I also think it’s a bit pricey for a keyboard tray, but again, I needed a long one and there are few options.