iPhone Stand.Ziku Aluminum iPhone Charger Stand Dock Station for iPhone Charging Dock, iPhone Charger, Stand for iPhone 8, 8 Plus, iPhone X, iPhone 7, 7 Plus, 6, 6 Plus, Support Charging with Case

Excellent 'dock' for your lightning cable accessories. The dock is well made from aluminum, is sturdy and of reasonable weight without being overly heavy. A few notes: 1) You must use a lightening cable that generally aligns to the dimensions of a certified Apple lightening cable. For example, if you purchase an Amazon lightening cable the lightening end will be too wide to fit into the included 'tip clips'. 2) Six 'tip clips' are provided so you can match the stand to your particular device configuration. The clips basically position the lightening tip incrementally higher (i.e. tip extends further from the clip base) to account for varying thicknesses of device cases such as OtterBox, CandyShell, LifeProof, etc. 3) The lightening cable provided is only about 3 feet and does not include a power converter so plan ahead. 4) The back of the stand is adjustable, again, to account for the thickness of your device and device case. The back can be moved forward/backward via a thumb screw. I knocked one star for the fact that the cable is just too short and the back thumb screw has no way to set the adjustment and I suspect it will move over time as the thumb screw fits very loosely. Overall, I highly recommend this well thought out dock.

A sleek and modern looking dock, well made from milled aluminum, so it's nice and heavy. The entire kit is thoughtfully designed. The bottom of the base includes a carved channel for the included, standard length, lightning cable. There are four dock adapters, designed to match a variety of case designs, or no case. These adapters hold the lightning cable snugly in place. The back of the dock includes a screw mechanism to, again, adjust for multiple different case designs. The docks backing is rubberized, to help prevent slipping and so a hard surface is not scratching your case or naked iPhone. Even the unboxing is a quality, Apple'esque experience. If there is a minor quibble, the back could be a bit wider. But, really, it's an outstanding dock, the best I've used, and it's a bargain for the price.

Stand is really well-designed and well-engineered. Base is solid, rigid, with just enough weight to make the stand plus phone stable. The various adjustments are well-thought-out: the different (plastic) numbered inserts accommodate different case depths; I started with 1 for no case even though I have a minimalist case, and tried higher numbers until finding one that fit "just right." the standard cable threads through a raceway on the bottom and you need to be sure to tuck the cable in because that provides tension that keeps the cable from pulling through when you lift the phone off the stand. Padding behind the phone is adjustable with big knurled nobs you can have the phone resting on the pad, rather than precariously held up by the lightning connector. It would be a little bulky to travel with (it doesn't fold or collapse), but I may consider it, as it makes perfect bedside stand and I always prefer relying on my own phone and alarm rather than hotel's.

This base/stand has a smart, sharp, stylish look to it, and its matte finish prevents any visible scratches. The unit I received had number-labels on the Lightning-plug adapter inserts and the instructions specified which number best matched popular case styles, making 'assembly' a breeze (I have the Symmetry). There are a few drawbacks I find with the engineering: 1. The area the phone rests on should be approximately 1/2 to 3/4-inch wider, to 'steady' the phone on it. At its current width, the phone is not 'stable' on the base. It allows the phone to wobble, which can't be good for the connector on the $800+ phone! 2. The thumb-screw to adjust the 'TPU Back' doesn't match the threading of the rear upright support. The thumb-screw fits loosely, instead of having a nice 'machine-screw' fit like a traditional nut/bolt does (I wrapped a 1-inch strip of Teflon-tape around mine to create a nice fit). 3. The TPU Back has a strong small circular magnet causing it to 'snap' to the thumb-screw's flat surface & help prevent the TPU Back from being very unstable (wobbly). The manufacturer would get better stability by adding a strong compression-spring between the TPU Back and the rear 'upright', around the thumb-screw. These few minor enhancements would make for a stand that can't be beat. All of the others I've tried won't charge an iPhone with a case on it, making them useless. Taking my phone out of the case to charge it defeats the purpose of buying a charging-stand in the first place! P.S. Be sure to keep the bag of inserts, Allen-wrench & stuff the instruction in the bag, in-case you change phone cases, etc.

Good price, great product. We have two different I-phones, a 6 and an 8 Plus, different size cases, etc. and can still use it for both. Contains adaptors for numerous size cases so you can custom fit your phone/case. I set the depth for my wife's "6" and, by placing my 8 Plus with the face toward the backrest, I can even leave my "PopSocket" on the back of my phone. Excellent, quite heavy, base protects the phone from tipping over while charging. Even has an attractive appearance just sitting on the counter when it's not being used. I can completely recommend this product!

Not a bad stand for the money, I wish it had come with a cable as it did for some other reviewers. Overall it has a nice look and came with more than enough adapters to position the lightning plug for nearly any case. Another plus is that the adapter holds the plug even with the slightly frayed end that all of my apple lightning seem to end up with.

Nice piece of metal. Heavy so it's less likely to fly off your desk or shelf. The back easily adjusts for different phone thicknesses. The problem is with the 6 different inserts to adjust the lightning connector with your phone. I have a Spigen Liquid Armor 7plus case and none of the inserts match it so the phone is balanced on the connector until I get something to even out the gap. Not a great way to maintain your phone. You should check with the manufacturer if your case matches the provided inserts.